1" High range for 9.5 mm - 11.5 mm dovetails up to 60 mm Lens Dia.

One Piece Double screw mount adjustable for windage and elevation. Suitable for all spring guns / semi auto rimfire rifles. Suitable for some pre-charged pneumatic air rifles such as BSA SuperTen and Weihrauch HW100. The maximum amount of adjustment is 2mm from one end of the mount to the other. This applies to the windage and elevation. N.B. Will clear 60mm objective lens dia. on most rifles. Includes removable arrestor pin.

1" High range for 9.5 mm - 11.5 mm dovetails up to 60 mm Lens Dia.

Two Piece double screw mount adjustable for windage, elevation and height. The ATP65 can also be adjusted laterally so scopes can be perfectly centred with dovetails. The adjuster screws have a special anti vibration coating to ensure no loss of zero and easily withstand F.A.C rated spring air rifle recoil. Will clear 60mm lens dia. scopes on most rifles.

High Range to suit 30mm dia scopes upto 60mm lens dia and 9.5 - 11.5mm dovetails.

Two Piece double screw mount adjustable for windage, elevation and height. The ATP66 can also be adjusted laterally so scopes can be perfectly centred with dovetails. The adjuster screws have a special anti vibration coating to ensure no loss of zero and easily withstand F.A.C rated spring air rifle recoil. Will clear 60mm lens dia. scopes on most rifles.

30 mm High range for 9.5 mm - 11.5 mm dovetails up to 56 mm Lens Dia.

One piece double screw mount. Rubber bushes prevent scope damage.

1" High range for 9.5 mm - 11.5 mm dovetails up to 50 mm Lens Dia.

One piece double screw mount (up to 50mm lens dia. without external parallax ring). Rubber bushes prevent scope damage.

1" Medium range for 9.5 mm-11.5 mm dovetails up to 45 mm Lens Dia.

One piece single screw special mount with body cut away to 85 mm and one ring moved 10 mm to allow scope to be mounted 35 mm further forward or rearward than standard mounts. Especially suitable for the BSA range of air rifles and rifles with eye relief problems.

1" Medium range for 9.5 mm-11.5 mm dovetails up to 45 mm Lens Dia.

One piece single screw angled mount with 0.75mm of vertical taper machined into the body. Particularly usefull when the elevation adjustment on the scope is not sufficient and with air rifles with drooping barrels. Includes removable arrestor pin.

1" Medium range for 9.5 mm-11.5 mm dovetails up to 45 mm Lens Dia.

One piece double screw mount with removable arrestor pin.

1" Medium range for 9.5 mm-11.5 mm dovetails up to 45 mm Lens Dia.

One piece double screw mount specially designed to suit falcon and other pre-charged air rifles. Also suitable for certain combination guns with around 10m dovetails.

1" High range for 9.5 mm - 11.5 mm dovetails up to 56 mm Lens Dia.

One piece single screw angled mount with 0.75mm of vertical taper machined into the body. Particularly useful when the elevation adjustment on the scope is not sufficient and with air rifles with drooping barrels. Includes removable arrestor pin.

1" Medium range for 9.5 mm-11.5 mm dovetails up to 56 mm Lens Dia.

One piece double screw mount with removable arrestor pin.

1" Medium range for 9.5 mm-11.5 mm dovetails up to 45 mm Lens Dia.

Two piece double screw extended mounts, long front mount (46 mm) giving 25 mm extension to scope mounting points with removable arrestor pin.

1" High range for 9.5 mm - 11.5 mm dovetails up to 56 mm Lens Dia.

Two piece double screw extended mounts. Long front mount (46 mm) giving 25 mm extension to scope mounting points with removable arrestor pin.

1" Low range for 9.5 mm -11.5 mm dovetails up to 32 mm Lens Dia.

One piece double screw mount with removable arrestor pin.

30 mm High range for 9.5 mm - 11.5 mm dovetails up to 60 mm Lens Dia.

New Adjustable Elevation and Extra High Two piece 30mm Mount includes removable arrestor pin. Saves having to pack the rear mount. Point of impact can be adjusted on the mount. The height is between 1.5 and 2.8mm higher than our standard 30mm high range. Please note both front and rear mounts tilt to maintain correct alignment

Weaver / Picatinny High range to suit 30mm dia. scopes upto 56mm lens diameter

Two piece double screw extended mounts. The long front mount (46mm) gives 25mm extension to scope mounting points. Suits all Weaver / Picatinny rails. Includes square section high tensile arrestor bolt.

Weaver / Picatinny High range to suit 30mm dia. scopes upto 56mm lens diameter

Two piece double screw mounts with square section high tensile arrestor bolt to suit all Weaver / Picatinny rails.

Two piece double screw mounts. Air Rifle / Rimfire 1" High range for 9.5 -11.5mm dovetails up to 56 mm Lens Dia.

Two piece double screw mounts with removable arrestor pin. Air Rifle / Rimfire Rifle 30 mm High range for 9.5 mm - 11.5 mm dovetails up to 56 mm Lens Dia.

Two piece double screw mounts with removable steel recoil arrestor pin. Especially suitable for CZ 15 mm (small action) dovetails including the CZ527 / Fox. A = 15mm - B = 21mm. CZ 1" Medium range for 15 mm Dovetails up To 45 mm Lens Dia.