The durable bits fount in this screwdriver set are made from high-grade tool steel hardened to 56-58 Rockwell C and are stored in a custom-molded box.

2 ergonomic driver handles for delivering maximum torque - 54 hollow ground bits specifically designed to match the thin slots in gun screws, sizes ranging from approximately .120 x .020 to .360 x .070 - 8 Allen bits (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16) - 4 Phillips bits (#0, #1, #2, #3) - 3 Torx bits (T10, T15, T20) - Note: includes two each of the very thinnest bits in this set, this is intentional as the thinnest are most likely to break - The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be considered a defect, rather it means that the fastener will require some other means of removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil.

The Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. Included with the standard, Phillips, hex, and torx bits is a 2" long extension which is ideal for recoil pad installation and a hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments. The magnetic handle is perfectly sized for gunsmithing needs and is also hollow-handled, allowing you to carry a variety of bits should the need arise.

Driver handle features compartment to hold extra bits - Contains 10 slot bits, 14 allen-head bits, 3 Phillips head bits and one 2" long bit extension for recoil pads - Packaged in plastic box - Contents made in China and assembled in US - The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be considered a defect, rather it means that the fastener will require some other means of removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil.